PHYASTRO / Physics notebook
Reading a position–time graph
Slopes, velocity signs, displacement and distance in a three-stage example.
Reviewed on 28 October 2026
A position–time graph records where an object is at successive times. It is not a picture of the route seen from above. Time runs along the horizontal axis, while the vertical axis gives a coordinate relative to a chosen origin and positive direction. A higher point means a larger coordinate, not necessarily faster motion.
What does the model assume?
Consider motion along a straight line. Join consecutive points in the table by straight segments, so velocity is constant within each interval. That is an assumption about what happens between readings. A table of a few positions alone cannot rule out additional movement between those readings.
| t (s) | x (m) |
|---|---|
| 0 | 1 |
| 2 | 5 |
| 5 | 5 |
| 7 | −1 |
The slope is the change in coordinate divided by elapsed time. Take two points on the same segment and retain their signs. Dividing the final coordinate by the final time works only in special cases where the relevant starting coordinate and time are both zero.
\[v_x=\frac{\Delta x}{\Delta t}=\frac{x_2-x_1}{t_2-t_1}.\]Calculate, then interpret
From 0 to 2 s, position rises from 1 m to 5 m, giving \(v_x=(5-1)/(2-0)=2\,\mathrm{m/s}\). Between 2 and 5 s, the graph is horizontal: the object stays at 5 m. Its velocity is zero even though its position is not zero.
From 5 to 7 s, position falls from 5 m to−1 m. Hence \(v_x=(-1-5)/(7-5)=-3\,\mathrm{m/s}\). The sign indicates motion in the negative coordinate direction. Its speed is 3 m/s, greater than during the first interval. Compare the magnitudes of slopes rather than segment heights.
Overall displacement is \(-1-1=-2\,\mathrm m\), while distance travelled is \(4+6=10\,\mathrm m\). Total duration includes the stop. Average velocity is \(-2/7\approx-0.286\,\mathrm{m/s}\), whereas average speed is \(10/7\approx1.43\,\mathrm{m/s}\). These are different quantities despite sharing the same units.
Common mistakes
Crossing the coordinate origin does not itself reverse the direction of motion: reversal requires a change in the sign of the slope. The area under a position–time graph is not distance; its units are metre·second. Sharp corners idealise rapid velocity changes rather than resolving the actual acceleration during each transition.
Always read the axis units before calculating a slope. A graph drawn in centimetres and minutes gives velocity in centimetres per minute until those units are converted. Changing the drawing’s scale changes its visual steepness, but not the numerical slope calculated from correctly labelled axes.
Check the reasoning
Do two equal position readings prove an object stayed still?
No. It could leave and return between readings. Here the specified horizontal segment establishes rest throughout the interval from 2 to 5 s.
What happens if the origin is shifted by 10 m?
Every coordinate changes by the same constant. Coordinate differences, slopes, velocities and distance travelled remain unchanged.
Why not average the values 2 and−3?
The intervals have different durations and the journey includes a stop. Use total displacement divided by total elapsed time.